For those users of SMT masks and woven screens, cleaning after printing is of the utmost importance to obtain the best results and accuracy of reproduction. Only well made, perfectly clean masks and screens will print exact thickness of Tin (Sn), for example, 0.3 to 0.5 mm with accurate edge definition, for the PCB market. Cleaning masks and screens by hand will not achieve this objective. The ultrasonic cleaner can be used for cleaning the screens for LCD screen printers and for cleaning the LCD glass substrates.

"Faithful", with its strong background in R&D in screen printing industry in Taiwan, has developed the "ULTRASONIC CLEANER" , SUC-800 and SUC-1200 for easy to use, low cost products offering the most complete and fast cleaning system to increase productivity, quality, and improve the working environment.

ECONOMIC PRICE:

It is not necessary to buy large and expensive equipment when only small quantities of masks and screens require cleaning. Large equipment takes up too much space. The SUC-800 and SUC-1200 are the choice to solve this problem economically and easily for masks and screen sizes of 800x120x800, 1200x120x1200 mm and the other sizes by request.

CLEANING MASKS AND SCREENS FAST, THOROUGHLY AND CAREFULLY BY USING AN ULTRASONIC WAVELENGTH OF 35 Hz:

The difference between the ultrasonic cleaners SUC-800 and SUC-1200 is the ability to perform across the full range of cleaning action using short wavelength 35 Hz to process the cleaning action quietly and the superior cleaning ability over the 600W/1200W ultrasonic wavelength. This power cleans the corners of masks and screens completely.

IMPROVING THE WORKING ENVIRONMENT:

Cleaning processes using solvents, for example, IPA, Ethanol, and Iso-Ethy Ether, have a health and safety problem and those solvents are volatile, flammable, and cause skin irritation. The ultrasonic cleaners, SUC-800 and SUC-1200, using particularly cleaning detergents water-based to be safe to the environment are not dangerous and perform the cleaning process better than those solvents. They are safer in the working environment and increase productivity.

CLEANING BASKET AND RACK:

Standard accessories:    Cleaning Basket and Rack, ideal for cleaning and drying. The size of the cleaning tank, basket and rack of the Ultrasonic Cleaner will accept not only the mask or screen sizes of 800x120x800 mm and 1200x120x1200 mm but also others' generally standard outside dimensions of the aluminum screen frames.

CONTROLS FOR EASE OF OPERATION:

Cleaning time can be set from 1 to 99 minutes as required. The cleaning temperature has maximum of 40 degrees Celsius. To operate, place the mask or screen in the cleaning basket, then place the basket into the cleaning tank. Turn on power and the main switch to activate the ultrasonic cleaner. The unit will run automatically unitl the cycle is complete, or can be stopped manually at any time.

If the detergent is low or there is an abnormal increase in temperature, the LED will flash a warning.

The sludge at the bottom of the tilt tank can be drained easily from the outlet.

SPECIFICATIONS:
 

Model		SUC-800	SUC-1200
WORKING	washing clean	ultrasonic clean	ultrasonic clean
PROCESS	dry	dry at room temperature	dry at room temperature
	inner size of the tank	800x120x800mm	1200x120x1200mm
	material of the tank	stainless steel SUS-304	stainless steel SUS-304
ULTRASONIC	ultrasonic wavelngth	600w	1200w
CLEANING	sludge drain	on/off valve	on/off valuve
TANK	electric power	800w	1200w
	detergent temperature	electronic setting	electronic setting
	cleaning time	electronic setting	electronic setting
POWER SUPPLY		single phase, 220V	single phase, 220V
DIMENSION		970x600x1000mm	1370x600x1400mm